The brake cleaner from HELLA attracts brake dust and is a reliable means of removing oil, grease, dirt, and brake fluid – and it leaves no residue. Therefore, this tried-and-tested cleaning agent is suited for almost general use for all brake, coupling and drive parts, as well as starters, alternators, carburetors, fuel pumps, and engine parts. It does not cause polystyrene to break down and is free from chlorinated solvents.
Use:
Spray soiled parts intensively and allow solvent to drain or evaporate.
If necessary, wipe off with a towel until dry. Repeat if parts are heavily soiled.
HELLA brake cleaner is available in 500 ml spray cans.
In order to ensure safe functioning in the long term, the wheel brake must undergo regular maintenance. During maintenance, all mechanical parts should be greased with a temperature-resistant, non-metallic, permanent lubricant. When doing so, always ensure that the lubricant is suitable. To eliminate all risks and prevent possible malfunctions in the highly sensitive safety systems (ABS, electronic stability programs) while driving, we recommend that you use HELLA mounting paste.
Use:
HELLA mounting paste is available in a 75 ml tube.
In addition to the alarm contacts which are already delivered with brake linings, HELLA has over 220 replacement alarm contacts in its product range. These are offered for brake linings that are not equipped with alarm contacts as standard.
The range is developed in line with the introduction of new brake linings.
We offer both mechanical and electrical alarm contacts that are highly resistant to heat.
Alarm contacts also alert the driver when a brake lining will be worn out and require replacement. This provides you with an extra degree of safety.
The HELLA product range has over 550 accessories for brake linings and brake shoes. The products are launched on the market to be compatible with developments in brake lining and shoe technology.
We provide accessories for four different product groups: