A selection of our products for agricultural vehicles

• Excellent light performance of low beam and high beam from a single headlamp module 
• “Zero Tolerance Integration” creates new design freedom 
• For challenging applications

• Excellent low beam and high beam from a single headlamp module 
• Design freedom thanks to a modular system 
• For the most diverse applications and the highest demands

• Particularly compact LED headlamp series
• Specially developed lens system for homogeneous illumination
• Enables easy conversion from halogen to LED technology

• LED headlamp for easy conversion from halogen to LED
• Low beam, high beam and position light in a single headlamp
• Available as installation and surface-mounting version

• Premium design and a flexible light signature thanks to three-dimensional surfaces enabling designer contouring with various mounting and combination possibilities also available
• Multivolt
• ECE and SAE compatible

• Industry-exclusive use of the highly durable Grilamid® material for the lens
• New, slim design that is feather-light and maintenance-free for the service life of the vehicle
• Ideal for your agricultural and forestry vehicles: Optionally available with trim piece in stainless steel or with colored end caps

• LED lamps with innovative light guide design
• Optimum signal pattern with extremely low power consumption
• Fit and forget: Outstanding reliability, vibration resistance and extremely long lifetime

• ECE type-approved position light in efficient LED technology
• Large-area illumination with state-of-the-art night design
• Multi-volt technology stabilizes the light output within a voltage range of 8-32 V

• For diverse applications and the highest demands
• Ongoing expansion of the 90 mm module range
• Maximum design and technological freedom thanks to modular system
• More illumination and safety with innovative LED technology

• More powerful 90 mm H1 module headlamps
• in halogen low beam and high beam design
• Can be combined with other 90 mm modules

• Premium design and a flexible light signature thanks to three-dimensional surfaces enabling designer contouring with various mounting and combination possibilities also available
• Multivolt
• ECE and SAE compatible

• Large-surface LED light guide for the taillight function, combined with reflex reflector
• Maintenance-free, fully sealed LED light
• Impact-resistant lens

• LED ring module with innovative LED edge light technology
• Combined tail/stop light with continuous light function

• Industry-exclusive use of the highly impact-resistant Grilamid® material for the lens
• New, slim design that is feather-light and maintenance-free for the service life of the vehicle
• Optionally available with trim piece in stainless steel or with colored end caps

• LED lamps with innovative light guide design
• Optimum signal pattern with extremely low power consumption
• Fit and forget: Outstanding reliability, vibration resistance and extremely long service life

• Compact design and optimal illumination
• Highly efficient electronic set-up with minimum energy consumption
• Multi-volt design for flexible use in 12 V and 24 V systems
• ADR-certified for dangerous goods transport

• License plate light with extremely low energy consumption by using 4 power LEDs
• Available as flush-mounting or surface-mounting variant
• High dust and water resistance

• Long lifetime with low current consumption
• Temperature-optimized components prevent overload
• Multi-voltage 9-33 V

• Tail/stop/direction indicator light with triangular or standard reflex reflector with bulbs or as a LED hybrid
• Simple conversion of bulb to LED for taillight /stop lamp function
• ECE and SAE approvals

• Maintenance-free, fully sealed LED combination tail light
• Maximum luminous efficiency due to combination of high grade LEDs and precision optics.
• Use in accordance with ECE R48 thanks to patented HELLA direction indicator failure monitor

• Brake light, taillight and indicator in a rectangular LED rear combination lamp
• No need to change light sources, no maintenance and an extremely long service life thanks to efficient temperature management
• Multi-volt design for 8–28 V ensures the light output remains stable, even in the event of voltage fluctuations

• LED taillight, brake light and direction indicator with easily visible signaling and very low energy consumption
• Hermetically sealed and resistant to UV radiation
• Available for 12 V and 24 V vehicle electric systems

• Low-profile tail, stop, and direction indicator light with LED technology
• Multi-voltage from 10 to 31 volts
• Long service life 

• LED license plate light in 12 V and 24 V versions
• Flush-mounting or surface-mounting variant
• Long service life with low current consumption

• Set of two modules is homologated as “half bar” (ECE R65 HTA1)
• Wide angle coverage of at least 270° by using two modules and 360° by using four modules
• Synchronization of 2 or 4 modules

• Design beacon that impresses both technically and visually
• Legally protected design
• Innovative light exit area

• Very high warning effectiveness
• Modern design
• Flashing light function

• Flashing light function
• Approved for ECE and SAE
• High warning effectiveness

• Rotating or flashing LED light function
• Dual lighting system
• Large light exit area
• Low current consumption, high efficiency

• Sensor-controlled automatic day time/night time level: optimum warning, no glare!
• Rotates or flashes - as required by the application.
• Meets IP 67 requirements: dust-proof and a brief immersion in water is possible

• Beacon with rotating LED light function and long lifetime
• Flat and compact design with exceptional vibration resistance
• The innovative electronics concept makes a rotating function possible without moving parts

• Powerful LED interior lamp with long service life
• Voltage fluctuation compensation thanks to multi-volt

• Flexible slim-line awning lamp with low power consumption
• Extremely low profile facilitates flexible installation

• Extremely impact-resistant lens made from Grilamid®
• Very long service life
• Super-flat design for surface mounting: 9 mm deep

• Optimal luminous efficiency thanks to the use of 4 LEDs
• Ambient lighting
• Compact height

• LED interior lamp with extremely flat design for maximum versatility
• Homogenous illumination at a very low level of power consumption by using 24 LEDs.
• With integrated switch for greater comfort

• LED technology
• Protection class IP 6K9K
• ADR/GGVS approved
• Ideal for use as a ceiling lamp in refrigerated trucks, ambulances, driver cabs, and storage spaces

• LED technology
• Mounting possible with and without frame
• 12 V and 24 V

• LED and bulb technology
• Fixed and adjustable
• With ambient Celis® ring

• LED technology
• Available with 150 mm and 400 mm arm length
• With and without connector for cigarette lighter/power socket

• Round LED daytime running lights with ECE type approval
• Optimum visibility when driving during the day due to combination of power LEDs and individual precision reflectors
• Convenient installation and operation

• Round LED daytime running light for flush-mounting, 12 V and 24 V variant
• Dust-proof, protected from high-pressure cleaning and temporary immersion
• Simple mounting thanks to central fastening screw

• Set of LED daytime running lights for surface mounting
• Excellent alternative for fitting to vehicles without bevel and for uncomplicated retrofitting.
• They are not only safer, but also more environmentally friendly than conventional low beam headlamps.

• Premium design and a flexible light signature thanks to three-dimensional surfaces enabling designer contouring with various mounting and combination possibilities also available
• Multivolt
• ECE and SAE compatible

• Auxiliary indicator for side-mounted installation (category 5) with optimal light pattern in the smallest of installation spaces
• Extremely low energy consumption of 0.7 W by combining efficient LEDs with precision lenses
• Dust tight housing and protected against powerful water jets and high-pressure cleaners

• ECE type-approved side marker light in efficient LED technology
• Large-area illumination with state-of-the-art night design
• Multi-volt technology stabilizes the light output within a voltage range of 8-32 V

• LED lamps with innovative light guide design
• Optimum signal pattern with extremely low power consumption
• Fit and forget: Outstanding reliability, vibration resistance and extremely long service life